Group’s papers

BOOK

  • Armendia, M., Ghassempouri, M., Ozturk, E., Peysson, F. (Editors.), Twin-Control, A Digital Twin Approach to improve Machine Tools Lifecycle, Springer, ISBN 978-3-030-02203-7

BOOK CHAPTERS

  1. Berglind L., Ozturk E. (2019) Modelling of Machining Processes. In: Armendia M., Ghassempouri M., Ozturk E., Peysson F. (eds) Twin-Control. Springer, Cham
  2. Armendia M. et al. (2019) Machine Tool: From the Digital Twin to the Cyber-Physical Systems. In: Armendia M., Ghassempouri M., Ozturk E., Peysson F. (eds) Twin-Control. Springer, Cham
  3. Plakhotnik D. et al. (2019) Visualization of Simulated and Measured Process Data. In: Armendia M., Ghassempouri M., Ozturk E., Peysson F. (eds) Twin-Control. Springer, Cham

REFEREED JOURNAL PAPERS

  1. Verl,A., Valente, A.,  Melkote, S., Brecher, C., Ozturk, E. Tunc, L.T., (2019) Robots in machining , CIRP Annals – Manufacturing Technology,  https://doi.org/10.1016/j.cirp.2019.05.009
  2. McCloskey, P., Katz, A., Berglind, L., Erkorkmaz, K., Ozturk, E., Ismail, F.,(2019), Chip geometry and cutting forces in gear power skiving, (2019),CIRP Annals – Manufacturing Technology, https://doi.org/10.1016/j.cirp.2019.04.085
  3. Ozturk, E., Barrios, A., Sun, C., Rajabi, S., Munoa, J. (2018) , Robotic assisted milling for increased productivity. CIRP Annals – Manufacturing Technology, 4–7. https://doi.org/10.1016/j.cirp.2018.04.031
  4. Gibbons, T.J., Ozturk, E.,  Sims, N.D.,(2018),  Rotational degree-of-freedom synthesis: An optimised finite difference method for non-exact data,Journal of Sound and Vibration, Volume 412, , Pages 207-221,https://doi.org/10.1016/j.jsv.2017.09.031
  5. Ozturk, E., Ozkirimli, O., Gibbons, T. , Saibi, M., Turner, S., (2016), Prediction of effect of helix angle on cutting force coefficients for design of new tools, CIRP Annals Manufacturing Technology, Volume 65, Issue 1, Pages 125–128,https://doi.org/10.1016/j.cirp.2016.04.042
  6. Allwood, J. M., Childs, T. H., Clare, A. T., DeSilva, A. K. , Dhokia, V , Hutchings, I. M., Leach, R. K., Leal-Ayala., D. R., Lowth, S., Majewski, C. E., Marzano, A., Mehnen, J., Nassehi, , Ozturk, E., Raffles,  M. H.,  Roy, R., Shyha,  I.,  Turner, S., (2016), Manufacturing at double the speed, Journal of Materials Processing Technology, Volume 229, 729–757, https://doi.org/10.1016/j.jmatprotec.2015.10.028
  7. Ozturk, E., Comak, A., Budak, E., (2016), Tuning of tool dynamics for increased stability of parallel (simultaneous) turning processes, Journal of Sound and Vibration, Volume 360,Pages 17–30, https://doi.org/10.1016/j.jsv.2015.09.009
  8. Budak, E., Comak, A., Ozturk, E., (2013), Stability and High Performance Machining Conditions in Simultaneous Milling, CIRP Annals Manufacturing Technology Volume 62, Issue 1, Pages 403-406, https://doi.org/10.1016/j.cirp.2013.03.141
  9. Ozturk, E., Kumar , U., Turner, S. ,Schmitz, T., (2012), Investigation of Spindle Bearing Preload on Dynamics and Stability Limit in Milling, CIRP Annals Manufacturing Technology, Volume 61, Issue 1, Pages 343–346,https://doi.org/10.1016/j.cirp.2012.03.134

REFEREED CONFERENCE PAPERS

  1. Barrios, A., Mata, S., Fernandez, A., Munoa, J., Sun, C., Ozturk, E., (2019), Frequency Response Prediction For Robot Assisted Machining. High Speed Machining (HSM) Conference 2019, 8-9 October 2019
  2. Gurdal, O. , Rae, B., Zonuzi, A.,  Ozturk, E., (2019), Vision-assisted robotic finishing of friction stir-welded corner joints,  19th Machining Innovations Conference for the Aerospace Industry, 27-28 November 2019
  3. Armendia, M., Cugnon, F., Berglind, L. ,Ozturk, E. , Gild, G., Selmie, J. (2019) Evaluation of Machine Tool Digital Twin for machining operations in industrial environment, 17th CIRP Conference on Modeling of Machining Processes, 13-14 June 2019
  4. Celikag, H. , Sims,  N., Ozturk, E. (2019), Chatter Suppression in Robotic Milling by Control of Configuration Dependent Dynamics, 17th CIRP Conference on Modeling of Machining Processes, 13-14 June 2019
  5. Urena, L. , Sims,  N., Ozturk, E. (2019)Convergence Analysis of the Multi-Frequency Approach around a Variable-Helix Instability Island, 17th CIRP Conference on Modeling of Machining Processes, 13-14 June 2019
  6. Sun, C, Kengne, P, Barrios, A., Ozturk, E. (2019), Form Error Prediction in Robotic Assisted Milling, 17th CIRP Conference on Modeling of Machining Processes, 13-14 June 2019
  7. Azvar,M. ,McCloskey,P., Berglind,L., Erkorkmaz,K., Ozturk,E. (2019) Time-Domain Analysis of Dynamics and Stability of Power Skiving Operation,8th International Conference on Virtual Machining Process Technology (VMPT), Vancouver, April 23-25, 2019
  8. Celikag, H. , Sims,  N., Ozturk, E. (2018)Cartesian stiffness optimization for serial arm robots, 8th CIRP Conference on High Performance Cutting, 25-27 June 2018, Budapest, Hungary
  9. Ureña, L. , Sims,  N., Ozturk, E. (2018), Stability of variable helix milling: model validation using scaled experiments, 8th CIRP Conference on High Performance Cutting, 25-27 June 2018, Budapest, Hungary, https://doi.org/10.1016/j.procir.2018.08.277
  10. Vrabic, R., Kozjeka, D., Ozturk, E., Tunc¸L. T., Malusa, A., Butala, P.,  (2018), Identification of the CIRP expertise network based on public data, 51st CIRP Conference on Manufacturing Systems, https://doi.org/10.1016/j.procir.2018.03.107
  11. Plakhotnik, D., Berglind, L.,   Stautner, M., Euhus, D. , Ozturk,  E.,  Fuertjes, T., Murtezaoglu, Y., (2018), Integration of Process Monitoring Data into CAM Simulation, XIVth International Conference on High Speed Machining: Productivity, Quality and Digitalization
  12. Cugnon, F., Berglind, L., Plakhotnik, D., Armendia, M., Ozturk, E., (2018) Modeling of machining operations based on the Virtual Machine Tool concept, The 5th Joint International Conference on Multibody System Dynamics,June 24 –28, Lisbon, Portugal
  13. Berglind, L., Plakhotnik, D., Ozturk, E., (2017), Discrete Cutting Force Model for 5-Axis Milling with Arbitrary Engagement and Feed Direction, Procedia CIRP
    Volume 58, Pages 445-450
  14. Ozkirimli,O., Fletcher, S., Kite,J.,  Longstaff, A.P., McVey,S.,  Ozturk, E., (2017), Modelling and visualisation of machine tool and process related form errors, 6th International Conference on Virtual Machining Process Technology (VMPT), Montréal, May 29th – June 2nd, 2017
  15. Cugnon, F., Berglind, L., Plakhotnik, D., Ozturk, E., (2017), Advance Modeling of Machine Tool Machining Process, ECCOMAS Thematic Conference on Multibody Dynamics, Prague, Czech Republic / 19-20 June 2017
  16. Gurdal, O., Ozturk, E., Sims, N., (2016), Analysis of Process Damping in Milling, Procedia CIRP, Volume 55, 2016, Pages 152-157, https://doi.org/10.1016/j.procir.2016.09.012
  17. Ozturk, E., Ozkirimli, O. Turner, S., (2015), Parallel Machining Dynamics with Multiple Time Delays, 12th IFAC Workshop on Time Delay Systems, University of Michigan, Ann Arbor, MI, USA, https://doi.org/10.1016/j.ifacol.2015.09.402
  18. Delgado, A., Ozturk, E., Sims, N., (2013), Analysis of Non-Linear Machine Tool Dynamic Behaviour, Proceedings of the 5th Manufacturing Engineering Society International Conference, Zaragoza, Spain, https://doi.org/10.1016/j.proeng.2013.08.238
  19. Euan ,I., Ozturk, E., Sims, N., (2013), Modelling Static and Dynamic Cutting Forces and Vibrations for Inserted Ceramic Milling Tools, Proceedings of 14th CIRP Conference of Modelling of Machining Processes, Turin, Italy, https://doi.org/10.1016/j.procir.2013.06.151
  20. Ozturk, E., Bilkhu, R. , Turner, S., (2012), A Study on the Effects of Spindle Speed on Tool Tip Dynamics, UMTIK 2012, 15th International Conference on Machine Design and Production, Denizli, Turkey
  21. Ozturk, E. , Taylor, C.M., Turner, S. ,Devey, M., (2011), Modelling and Development of a High Performance Milling Process with Monolithic Cutting Tools, AIP Conf. Proc. 1353, pp. 663-663, The 14th International ESAFORM Conference On Material Forming, Belfast, UK